Tank choice is not just about litres
Capacity matters, but so do the tank construction, available footprint, access route and the way the replacement will connect into the existing oil-heating system.
BMK heating services
Oil Tanks across Northern Ireland
A tank is part of the heating system but it also occupies an external site position with access, support and separation considerations. The replacement therefore needs to be planned around the property rather than chosen from dimensions alone. Choose the area below for local coverage, related services and location-specific contact information.
Detailed service guide
What homeowners should know about oil tank replacement
These are the practical checks that make the advice more useful and reduce the chance of booking the wrong work.
Base, access and surroundings need checking
A replacement has to work with the current site. The support, delivery route and surrounding walls, buildings, boundaries or landscaping can all affect the practical installation plan.
Bunded and single-skin options
The suitable tank specification depends on the property and installation circumstances. BMK can assess the existing arrangement and explain what needs to be considered rather than assuming the old tank should simply be copied.
Oil line and remaining fuel are part of the job
The tank does not sit in isolation. Existing fittings, the oil line, fuel still in the old tank and any boiler work being planned should be raised before the replacement is agreed.
Cost & scope
What changes the quote?
BMK prices the actual job rather than using a one-size-fits-all headline figure.
- Tank size, construction and specification
- Access for removing the old tank and bringing in the replacement
- Condition and suitability of the existing base or support
- Oil-line or fitting changes needed
- Remaining fuel and how the changeover needs to be planned
Faster first assessment
What to send BMK
Useful details help BMK understand the likely scope before travel or a site visit is arranged.
- Property postcode
- Wide photo of the whole existing tank
- Photos of the base and surrounding area
- Photos of the access route from gate/drive to tank
- Any visible damage, staining, smell of oil or current leak concern
Choose your area
Oil Tanks service areas
Choose the nearest service area below, then use the local page for practical guidance, related heating services and contact details.
ArmaghView oil tanks information for Armagh →BanbridgeView oil tanks information for Banbridge →CoalislandView oil tanks information for Coalisland →CookstownView oil tanks information for Cookstown →CraigavonView oil tanks information for Craigavon →DungannonView oil tanks information for Dungannon →EnniskillenView oil tanks information for Enniskillen →LisburnView oil tanks information for Lisburn →LurganView oil tanks information for Lurgan →MagheraView oil tanks information for Maghera →MagherafeltView oil tanks information for Magherafelt →Mid UlsterView oil tanks information for Mid Ulster →NewryView oil tanks information for Newry →OmaghView oil tanks information for Omagh →PortadownView oil tanks information for Portadown →StrabaneView oil tanks information for Strabane →BelfastView oil tanks information for Belfast →North BelfastView oil tanks information for North Belfast →East BelfastView oil tanks information for East Belfast →South BelfastView oil tanks information for South Belfast →West BelfastView oil tanks information for West Belfast →
Is it the right service?
Oil-tank replacement needs proper site planning
If a domestic heating oil tank in Northern Ireland is ageing, damaged, leaking or no longer suitable for the property, BMK can assess the existing setup and plan the replacement, access and heating-system reconnection carefully.
1
Visible cracking or damage
Physical deterioration, impact damage or obvious deformation should be assessed rather than ignored.
2
Signs of leakage
Oil staining, odour or dampness around the tank or fittings needs prompt attention to identify the source.
3
Unstable or poor support
The base and support arrangement are part of a safe, durable installation and should be considered when replacing a tank.
4
Ageing tank and fittings
A tank may still be holding oil but show enough deterioration that planned replacement is preferable to waiting for a failure.
5
Property or heating upgrade
Boiler replacement, landscaping or building work can be a sensible time to review whether the existing tank position and condition still make sense.
6
Access has changed
Fences, extensions, sheds or landscaping can make removal and replacement more complicated than the original installation, so access needs to be checked early.
The process
What to expect
The exact scope depends on the property, but the job should still follow a clear diagnostic and planning process.
Inspect the existing tank
Condition, position, base, pipework and access all need to be understood before replacement is planned.
Review the replacement position
The proposed location and practical clearances need to be considered in relation to the property and surrounding features.
Plan access and changeover
BMK considers how the old tank can be dealt with and how the new tank can be brought safely into position.
Reconnect the heating supply
The oil line and associated heating connections are dealt with as part of the planned changeover where included in the agreed work.
Check the completed setup
The finished installation and heating-oil supply arrangement are checked before the job is treated as complete.
Send an enquiry
Send BMK your oil tank details
Tell BMK what you need, where the property is and what is happening. A few useful details help BMK understand the job before getting back to you.
Useful details to include:
- Property postcode
- Approximate tank size if known
- Reason for replacement or relocation
- Photos showing the tank, base and access route